usually occurs when installing an update and suddenly system turns off.... so the most annoying effect you are not able to open system and you are struck..!!! so here is the solution for that problem..
**When applying SP1 for windows 7 there is a specific error that can happen during reboot. If you get this error “Fatal Error C0000034 Applying Update Operation 282 of...”, follow the steps below to fix the SP1 installation**
2 weeks back I came through same problem and this approach really worked and my system is working really fine :-) :-)
NOTE :-this will need a very careful and exact presence of mind since the procedure involves note pad and you cannot clearly distinguish characters..
so with this lets start solving your annoying system issue...
STEP 1:-
**When applying SP1 for windows 7 there is a specific error that can happen during reboot. If you get this error “Fatal Error C0000034 Applying Update Operation 282 of...”, follow the steps below to fix the SP1 installation**
2 weeks back I came through same problem and this approach really worked and my system is working really fine :-) :-)
NOTE :-this will need a very careful and exact presence of mind since the procedure involves note pad and you cannot clearly distinguish characters..
so with this lets start solving your annoying system issue...
STEP 1:-
Reboot your computer while it’s starting up.
STEP 2:-
When your computer starts up again, choose the option “Launch Startup Repair”
If you do not have this module installed in the OS, you'll need a Win7 install disc that is the same architecture (i.e. 32 or 64-bit) as the OS installed. Just boot to the CD and go from there.
STEP 3:-
When the Startup repair starts, click cancel.
STEP 4:-
After you click cancel it will show a box. Click “Don’t Send”, then click the link “View advanced options for recovery and support”
STEP 5:-
In the new window click Command Prompt at the bottom.
STEP 6 :-
In Command Prompt type this and press enter: %windir%\system32\notepad.exe
STEP 7:-
Notepad will open. In notepad go to File–>Open.
STEP 8:-
Change the type of files notepad views from .txt to All Files
STEP 9:-
Now in Notepad, go to C:\Windows\winsxs\ (or whichever drive Windows is installed on)
STEP 10:-
In that folder, find pending.xml and make a copy of it
Just copy and paste it in the same folder, this is just in case something happens to the original so you don't lose it.
STEP 11:-
Now open the original pending.xml
It will usually take a while to load because it's a huge file.
STEP 12:-
Press CNTRL+F and search for the following exactly: 0000000000000000.cdf-ms
That's sixteen (16) zeroes ;)
IMPORTANT note:- PLEASE DO A BACK UP OF NOTE PAD TEXT BEFORE GOING TO STEP 13
STEP 13:-
|